What Are The Maintenance Matters of CNC Swiss Lathe Motor?

Among the important parts of CNC Swiss lathe, the maintenance of the motor is very important. If there is a problem with the motor, the CNC Swiss lathe cannot run. So what should we pay attention to when maintaining the motor of CNC Swiss lathe?

1. The main motor and the drive motor should be moisture-proof. If the motor is flooded, it will cause the motor phase short circuit and burn the motor; the servo motor should be prevented from collision. If it is collided, it will cause the servo motor encoder to be damaged.

2. When equipped with servo motor or variable frequency speed regulation, the cause of the alarm and the method of eliminating the alarm can be found according to the alarm information (alarm number) of the servo driver or inverter.

3. When using frequency conversion, after cutting off the AC power supply, before the indicator light of the digital operator of the AC motor driver goes out, it means that there is still high voltage inside the AC motor driver, which is very dangerous. Do not touch the internal circuit and components, and operate after the power is cut off for 5 minutes.

4. The main power supply of the CNC Swiss lathe should be cut off when it is not used for a long time, and the CNC Swiss lathe should be guaranteed to run continuously for 2 to 3 hours at least once a month.

In fact, when maintaining a CNC Swiss-type lathe, you should not only pay attention to the motor, but also pay attention to important components such as the spindle.